Product overview:
Alloy steels are classified based on the types and amounts of alloying elements they contain. The alloying elements are added to enhance specific properties such as strength, hardness, corrosion resistance, and heat resistance. Here are common classifications of alloy steels based on their alloying elements:
Definition: Low-alloy steels contain small amounts of alloying elements (typically less than 8% by weight).
Properties: Improved strength, toughness, and hardenability.
Examples: AISI 4130, 4140, 4340.
High-Alloy Steels:
Definition: High-alloy steels contain a higher percentage of alloying elements, often exceeding 8%.
Properties: Exceptional corrosion resistance, heat resistance, and often specialized properties.
Examples: Stainless steels, tool steels.
Stainless Steels:
Alloying Element: Chromium (typically 10% or more).
Properties: Corrosion resistance, high-temperature strength.
Examples: Austenitic (e.g., 304, 316), ferritic, martensitic stainless steels.
Tool Steels:
Alloying Elements: Tungsten, molybdenum, chromium, vanadium.
Properties: High hardness, wear resistance, and heat resistance.
Examples: HSS (High-Speed Steel), D2, A2, M2.
Manganese Steels:
Alloying Element: Manganese (usually 10% or more).
Properties: High strength, toughness, and work-hardening ability.
Examples: Hadfield manganese steel (e.g., X120Mn12).
Nickel Steels:
Alloying Element: Nickel (usually in combination with other elements).
Properties: Enhanced toughness, impact resistance, and corrosion resistance.
Examples: Ni-Cr-Mo steels.
Chromium Steels:
Alloying Element: Chromium (typically 0.5% to 9%).
Properties: Improved hardenability, wear resistance, and corrosion resistance.
Examples: AISI 4140, 52100.
Molybdenum Steels:
Alloying Element: Molybdenum (typically 0.2% to 1%).
Properties: Increased strength, hardness, and high-temperature stability.
Examples: AISI 4130, 4340.
Vanadium Steels:
Alloying Element: Vanadium (typically 0.1% to 0.5%).
Properties: Improved strength, toughness, and wear resistance.
Examples: Vanadium tool steels.
Boron Steels:
Alloying Element: Boron (typically in small amounts).
Properties: Enhanced hardenability.
Examples: Boron-treated steels for hardenability improvement.
Silicon Steels:
Alloying Element: Silicon (usually up to 2%).
Properties: Improved electrical and magnetic properties.
Examples: Electrical steels, silicon-manganese steels.
These classifications provide a framework for understanding the diverse range of alloy steels available, each tailored to specific applications and performance requirements based on their alloying element composition.
Product use and advantages:
The specifications that can meet your needs are:
Contact Us
Your email address will not be published. Required fiels are marked